Problems with NXTCam V3

[adceran]

Hi to all,

My problem is the next. I have one program that follows the red color. It works perfectly when I use the NXTCamV2. However, if I replace this cam and put the NXTCamV3, my robot don't walk, and the Cam don't capture any blood. Is any specific configuration necessary to use the NXTCamV3 with lejOS??

Thank you very much!

[gloomyandy]

Can you read anything from the V3 do you get the version strings etc? If not are you sure you have the correct address? try running the i2cdevices sample, this should identify the sensor and what address it is using...

Andy

[adceran]

Thanks, finally I can obtain a solution to the problem. Regards