Pins of the NXJ

This is where you talk about the NXJ hardware related topics such as the brick, sensors, LEGO pieces, etc.

Moderators: roger, imaqine, 99jonathan

Machiel
Novice
Posts: 60
Joined: Tue Sep 09, 2008 11:36 am
Location: Netherlands
Contact:

Pins of the NXJ

Postby Machiel » Fri Nov 28, 2008 9:11 am

From the NXJ output singnals, the connactor. Which pin is what?

I am building a sensor but I need to know what is what.

I thought the blue one was the SDA, the Yellow one the clock, the green and the black the GND and the red the VDD

Apparently this is uncorrect?

Could someone help me?
WHAAAAAAAA!
I have skype: Machiel.veldkamp ADD ME! :D

User avatar
gloomyandy
leJOS Team Member
Posts: 4760
Joined: Fri Sep 28, 2007 2:06 pm
Location: UK

Postby gloomyandy » Fri Nov 28, 2008 9:33 am

The Lego hardware doc gives the pin outs, but not the colours. But it should be easy to identify the two ground pins and the 4.3V line and work the rest out from that... I did this some time ago when modifying the code of the i2c driver so that I could hook up a scope to the pins... I'm not at home at the moment, but if you are still having problems let me know and I'll take a look when I get home....

Andy

Machiel
Novice
Posts: 60
Joined: Tue Sep 09, 2008 11:36 am
Location: Netherlands
Contact:

Postby Machiel » Fri Nov 28, 2008 11:57 am

okee now I now that green is the VDD

and red and black the GND
WHAAAAAAAA!

I have skype: Machiel.veldkamp ADD ME! :D


Return to “NXJ Hardware”

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest

cron